SPECIAL OFFER
SCM Olimpic 300 "SMART" Edgebander
It allows the machine set-up operations to be managed from the control panel at every changeover of machining.
“Nesting” copying device for trimming-chamfering unit
To work panels already processed with “nesting” working cycle. A vertical copying device with 3 rotating contact points is mounted on the top of the trimming-chamfering unit in place of the standard copying disc.
“Nesting” copying device for the edge scraping unit
To work panels already processed with “nesting” working cycle. A vertical copying device with 3 rotating contact points is mounted on the upper unit of the edge scraping unit in place of the standard copying disc.
Elettric prearrangement for olimpic 300
For the retrofitting of the following working units:
– AAR anti-adhesive unit
– spay-mist device for edge finishing
– spray-mist device for delicate edges
– RC-N glue scraping unit
– SP-M brushing unit.
“SGP-E” glue pot – Instead of the standard one
It allows a quick changeover of the glue type/colour. The glue pot is supplied instead of the one supplied with the gluing unit.
RC-N” glue scraping unit
It eliminates any excess of glue in the joint between panel and edge. It is also possible the removal of small edge exceeding (0,1 mm for 1 mm edges).
Suitable for machining panels coming from nesting cycle.
“SP-M” brushing unit
With two independent motors for the cleaning/polishing of the edge.
eye-S Compact console: control panel with 10″ or 15″ touch screen and Maestro active edge HMI for quick and easy operation of all machine functions.
| Feed Speed | 10m/min |
| Panel Thickness | 8 – 60mm |
| Thickness Of Edges In Strips | 0,3-6mm |
| Thickness Of Rolled Edges | 0,3-3mm |
| Max. Section Of Rolled Edges | 135mm² |
| Coil-Holder Plate Diameter | 780mm |
| Exceeding Material To The Panel Thickness *(5 mm with max 3 mm edge thickness) | 2+3mm (5*) |
| Distance Between Two Successive Panels | 600mm |
| Minimum Panel Length (100mm Min. Width) | 140mm |
| Min. Length Of Edge In Rolls | 180mm |
| Min. Length Of Edge In Strips | 220mm |
| Min. Panel Width (210mm Min. Length) | 90mm |
| Min. Panel Width (240mm Min. Length) | 70mm |
| Min. panel dimensions for 4 side machining | 240 x 140mm |
| Min. panel dimensions for lengthwise machining only (LxW) | 240 x 70mm |
| Opening For Panel Support Roller | 500mm |
| Worktable Height | 900mm |
| “AUTOSET” for T-ER1 composition | |
| “Nesting” copying device for trimming-chamfering unit | |
| “Nesting” copying device for the edge scraping unit | |
| Electric prearrangement for olimpic 300 | |
| “SGP-E” glue pot – Instead of the standard one | |
| RC-N” glue scraping unit | |
| “SP-M” brushing unit |
SIMILAR PRODUCTS
OPENING HOURS
Monday - Friday : 8:30 - 17:00
Saturday : by appointment
Sunday : closed
CONTACT
Tel : 01275 371 922
Email : info@mjmwoodmachines.com













