SCM Olimpic 500 Edgebander
The SCM Olimpic 500 edgebander is a complete and versatile machine for SME’s able to perform different machining operations, in a small space, always with high quality standards.
Available in both pneumatic and electronic set-up versions, olimpic 500 allows machining with 2 radii, each with dedicated tool and panels with a minimum width of 60 mm.
Manufacture – SCM
Condition – New
Price – From £35,751 (ex VAT)
Versatility
Quick and easy glue change, EVA and polyurethane, thanks to the “SGP-E” glue pot, for a perfect joint line.
Quality
Machining of 2 radii, each with dedicated tool, thanks to the Multiedge device present on all working units, including the rounding.
User-friendly
Large touch control panels and software Maestro active edge offer the operator an efficient and intuitive work experience, as well as providing connectivity and synchronization to company systems.
Automatic edge feeding outside the cabin to reduce setup times in total safety.
| Function | Measurement |
|---|---|
| Feed speed | 12m/min |
| Panel thickness | 8 – 60mm |
| Strip edge thickness | 0,3-6mm |
| Coiled edge thickness | 0,3 – 3mm |
| Max section of coiled edge | 135mm2 |
| Coil-holder plate diameter | 780mm |
| Edge exceeding with respect to the panel thickness *(5 mm with max 3 mm edge thickness) | 2+3 (5)*mm |
| Panel distance | 600mm |
| Minimum panel length | 140mm |
| Minimum coiled edge length | 180mm |
| Minimum strip edge length | 220mm |
| Minimum panel width – lengthwise pass: *<=25 mm panel thickness, 240 mm minimum panel length * >25 mm panel thickness or > 3 mm edge 210 mm minimum panel length | 60mm 90mm |
| Minimum panel dimensions for 4 side machining | 140 x 140mm |
| Minimum panel dimensions for lengthwise machining only (LxW) | 240 x 60mm |
| Panel roller support opening | 500mm |
| Work table height | 900mm |
SIMILAR PRODUCTS
Worktable dimensions – 3465 x 710mm
Worktable height – 875 mm
Thickness of rolled edges – 0,4 ÷ 3mm
Max. thickness of edges in strips – 5mm
£22,611
Worktable dimensions – 3465 x 710mm
Worktable height – 875 mm
Thickness of rolled edges – 0,4 ÷ 3mm
Max. thickness of edges in strips – 5mm
£26,994
Feed speed – 10m/min
Panel thickness – 8-60mm
Thickness of edges in strips – 0,3-6mm
Thickness of rolled edges – 0,3-3mm
£21,064
OPENING HOURS
Monday - Friday : 8:30 - 17:00
Saturday : by appointment
Sunday : closed
CONTACT
Tel : 01275 371 922
Email : info@mjmwoodmachines.com
