SCM Olimpic 300 Edgebander

The SCM Olimpic 300 Edgebander is an Automatic single-sided edge bander for the application and gluing of edges with hot melt glue on
straight panels, on the four panel sides and the finishing of the panel corners.

Manufacture – SCM
Condition – New
Price – From £21,064 (ex VAT)

ADVANTAGES

TECHNICAL SPECIFICATION

ADVANTAGES

VERSATILITY

SGP-E glue pot: a single device for the spreading of both EVA and PUR glue is made possible by the non-stick treatment of the glue pot. Excellent glue line thanks to the perfect dosage and the special spreading roller.

EASY TO USE

Easy adjustments of the operating units with numeric indicators for the changeover between machining 2 radii, thin and solid wood edges.

FLEXIBILITY

45° chamfering, NO EDGE machining, different finishes on the top and bottom of the same panel are just some of the operations that can be performed by the olimpic 300.

SMART

eye-S Compact console: control panel with 10″ or 15″ touch screen and Maestro active edge HMI for quick and easy operation of all machine functions.

TECHNICAL SPECIFICATION


Feed Speed	10m/min
Panel Thickness	8 – 60mm
Thickness Of Edges In Strips	0,3-6mm
Thickness Of Rolled Edges	0,3-3mm
Max. Section Of Rolled Edges	135mm²
Coil-Holder Plate Diameter	780mm
Exceeding Material To The Panel Thickness *(5 mm with max 3 mm edge thickness)	2+3mm (5*)
Distance Between Two Successive Panels	600mm
Minimum Panel Length (100mm Min. Width)	140mm
Min. Length Of Edge In Rolls	180mm
Min. Length Of Edge In Strips	220mm
Min. Panel Width (210mm Min. Length)	90mm
Min. Panel Width (240mm Min. Length)	70mm
Min. panel dimensions for 4 side machining	240 x 140mm
Min. panel dimensions for lengthwise machining only (LxW)	240 x 70mm
Opening For Panel Support Roller	500mm
Worktable Height	900mm

SCM Olimpic 300 Edgebander

SIMILAR PRODUCTS

OPENING HOURS

CONTACT