SCM Minimax fs 41c Planer Thicknesser In Stock!

TERSA CUTTERHEAD
Minimax jointer/planers include the quick change knife head by “Tersa”. This cutterhead eliminates the necessity of gauging the knives each time to ensure proper height positioning. The Tersa knives automatically lock into position when the machine is turned on. Removal of the knives is as simple as tapping down the wedge blocks and sliding out the knives. Since the knives are double-sided, they can be flipped over, reinserted, and used again.

QUICKER CHANGEOVER
Changing between jointer and planer is a lot quicker on this machine than other models. Because there are separate dust collection outlets for the jointer and the planer, you do not need to drop the planer table all the way down in order to change back to a jointer. Also, when going back to using the planer function, you don’t have as much distance to travel to get to your planing thickness.

JOINTER FENCE
The FS 30 Classic has a separate jointer fence which rides on a rail mounted to the jointer table. The fence has a castiron knuckle and is tiltable to 45°
​
PLANER
The FS30 Classic has a 12” Jointer and a 12” Planer. The planer is able to process up to 9” thick material. The Jointer/Planer head also comes standard with a “Tersa” head. This quick change system allows you to change the cutterhead knives quickly and accurately to minimize down time. There is no need to set the knife height, this is done automatically.