Sedgwick TA450 Table Saw
The backbone of any joinery workshop is its sawbench. It should be powerful, accurate, reliable and simple and safe to operate. The Sedgwick TA450 table saw is designed with this in mind, and offers outstanding value for money. Its strength is in its construction, precision engineering, and our insistence on using only the best quality components.
Manufacture – Sedgwick
Condition – New
Price – From £6,495 (ex VAT)
Construction
A large cast iron table mounted on a heavy duty steel cabinet provides maximum timber support and a stable and accurate base for anchoring the spindle, rise and fall, and tilt mechanisms. The spindle is powered by a high efficiency IE2 industrial rated motor via a three belt drive, and features large diameter saw flanges for blade stability. It runs in ‘sealed for life’ bearings mounted in a cast iron housing, and requires only minimal maintenance.
Rise and fall and tilt mechanisms are square thread screws operated by handwheels at the front and side of the machine. Both are easily accessible.
Versatility
The rip fence is aluminium section, allowing for two working positions (ripping and angled ripping) and for movement fore and aft in relation to the sawblade. It is fixed to a heavy duty cast iron mounting bracket for rigidity, and has integral micro adjustment. The assembly runs on a nylon roller, gliding easily across the beds, and is supported by a 40mm diameter solid steel bar for rigidity, which gives 915mm capacity from the sawblade (an optional RH extension table is available to increase this to 1220mm).
Safety Features
Polycabonate overhead sawguard with 105mm dia Extraction Outlet
Electro-magnetic Braked Motor
Thermal overload no volt release protection
Lock off emergency stop Button
Lock off emergency foot switch
Lockable isolator
| Function | Measurement |
|---|---|
| Saw Blade Diameter | 450mm |
| Saw Blade Bore | 30mm |
| Saw Blade Projection @ 45 degrees | 105mm |
| Max Depth of Cut @ 90 degrees | 155mm |
| Spindle Speed | 3000rpm |
| 3 Phase Motor Power | 5.5kW |
| Size Of Table | 1125 (L) x 1000 (W)mm |
| Height Of Table | 855mm |
| Distance Saw To Fence | 915mm |
| Fence With Micro Adjustment | 825 x 75mm |
| Dust Extraction Outlet | Machine – 125mm Saw Guard – 105mm |
| Total Air Volume Required | 1445CMH |
SIMILAR PRODUCTS
Blade tilt – 0-45 °
Max depth of cut @ 45° – 76mm
Max depth of cut @ 90° – 105mm
£1,895
Blade tilt – 0-45 °
Max depth of cut @ 45° – 105mm
Max depth of cut @ 90° – 155mm
£2,950
Max depth of cut @ 45° – 76mm
Max depth of cut @ 90° – 105mm
Table size – 800 x 750mm
Blade diameter\bore – 315/30mm
£3,690
OPENING HOURS
Monday - Friday : 8:30 - 17:00
Saturday : by appointment
Sunday : closed
CONTACT
Tel : 01275 371 922
Email : info@mjmwoodmachines.com